SKU · sbp-inv-on-10k
SBP-ON-10K — 10 kW Three-Phase On-Grid Solar Inverter (IP65, Dual MPPT)
10 kW three-phase on-grid solar inverter for commercial rooftops. CE / TÜV / IEC 62109 certified, dual MPPT, IP65, 98.4 % efficiency. MOQ 10 units.
Highlights
- Dual MPPT (2 × 6 kW) handles split-roof orientations without yield loss
- 98.4 % peak European efficiency keeps payback under 4 years at MENA tariffs
- IP65 die-cast aluminum + conformal coating rated for 60 °C desert rooftops
- SASO / SONCAP / SNI country attestation issued before PO confirmation
- Country-localized grid code firmware flashed at the factory at no extra cost
Specifications
- rated_power_w
- 10000
- max_dc_input_power_w
- 12000
- mppt_count
- 2
- max_dc_voltage_v
- 600
- mppt_voltage_range_v
- 180-550
- ac_output_voltage_v
- 400 (3P+N+PE)
- ac_frequency_hz
- 50/60
- max_efficiency_pct
- 98.4
- ip_rating
- IP65
- ambient_temp_c
- -25 to +60
- topology
- transformerless
- communication
- Modbus RTU, RS485, Wi-Fi (optional)
- dimensions_mm
- 525 × 470 × 195
- weight_kg
- 24.5
- warranty_years
- 5
- certification
- CE, TÜV, IEC 62109-1/2, IEC 62116
Full datasheet PDF available on request. Tap "Request Quote" and our engineer will reply within 24h with FOB price, MOQ, and lead time.
Frequently asked questions
Can the SBP-ON-10K feed a 380 V grid as well as 400 V?
Yes. The AC stage covers 380 / 400 / 415 V three-phase with ±15 % tolerance, so the same SKU works on Saudi 380 V SEC networks, EU 400 V and most West-African 415 V utility lines. The active grid code is set at commissioning via the installer app — no hardware change required.What CE and IEC 62109 documents ship with each 10 kW inverter?
Every SBP-ON-10K ships with the EU CE Declaration of Conformity covering LVD 2014/35/EU and EMC 2014/30/EU, plus the TÜV-issued IEC 62109-1 (general safety) and IEC 62109-2 (grid-tied requirements) test summary. The full type-test report PDF (around 80 pages) is sent to the buyer's engineer 24 h after the quote request.Do you provide remote monitoring for a 10 kW SBP-ON-10K?
Yes. Modbus RTU over RS485 is included; an optional Wi-Fi dongle (USD 25 per unit) connects to the SolarBoltPro free monitoring portal and pushes 5-minute granularity yield, MPPT voltage / current, AC frequency and fault codes. The Modbus register map is open and lets you integrate with SCADA or PLN's third-party plant monitoring.
Request a Wholesale Quote
Fill the form and our sales engineer will reply within 24 hours with FOB price, MOQ, lead time, and certificates.
Related products
-
SBP-HY-5K — 5 kW Single-Phase Hybrid Solar Inverter (48 V Battery, UPS Backup)SKU · sbp-inv-hy-5k
-
SBP-OFF-3K — 3 kW Pure Sine Wave Off-Grid Inverter (24 V DC, MPPT)SKU · sbp-inv-off-3k