SKU · sbp-rail-4200
SBP-RAIL-4200 — 4.2 m PV Mounting Rail in Anodized Aluminum 6005-T5 (40 mm T-Slot)
Anodized aluminum 6005-T5 solar mounting rail 4.2 m × 40 mm T-slot. Spans 1.4 m, 2400 Pa load, container-ready. CE / EN 1090 EXC2. MOQ 200 rails.
Highlights
- 4.2 m length = one joint per 2-up portrait row of 2.27 m bifacial modules
- Rafter span 1.4 m at 2400 Pa keeps roof penetration count low (lower BOM cost)
- 40 mm top T-slot is the global standard — fits all SolarBoltPro and K2 / Schletter clamps
- 12 × 22 mm side channel accepts both M8 and M10 hammer-head bolts (L-foot, mid-foot)
- End caps (UV-stable PA66) included two-per-rail — no separate cap PO needed
Specifications
- length_mm
- 4200
- profile_height_mm
- 41
- profile_width_mm
- 41
- wall_thickness_mm
- 2.0
- weight_per_meter_kg
- 1.65
- material
- Aluminum 6005-T5 (anodized 15 µm)
- finish
- Silver anodized clear (matte)
- rafter_span_max_mm
- 1400
- wind_snow_load_pa
- 2400
- deflection_limit
- L/200
- t_slot_top_mm
- 40
- side_channel_mm
- 12 × 22 (M8 / M10 T-nut)
- salt_spray_h
- 1000
- warranty_years
- 12
- certification
- EN 1090 EXC2, CE DoC, ASTM B117
Full datasheet PDF available on request. Tap "Request Quote" and our engineer will reply within 24h with FOB price, MOQ, and lead time.
Frequently asked questions
How many SBP-RAIL-4200 rails are needed for a 40-module 2-up portrait array?
For 40 × 540 W modules in 2-up portrait (2 rows of 20), you need 4 × SBP-RAIL-4200 per row × 2 rows = 8 rails (two parallel rails per row at panel top and bottom edges), assuming a row length of ~20.6 m fits four 4.2 m rails with a 0.5 m overlap. Use SBP-RAIL-SPLICE-40 connectors at the joints; one container 20HQ (600 rails) covers ~75 such 40-module arrays.Will the SBP-RAIL-4200 ship as 4.2 m units or be cut for container loading?
Standard SKU ships uncut at 4.2 m, bundled 50 rails per pack, with corner protectors. A 20HQ container fits 600 uncut rails (12 bundles). If your project needs custom 2.1 m or 3.3 m cuts to suit a specific roof, we offer factory cutting at USD 0.30 / cut with no MOQ change; specify in the PO and we ship pre-cut and pre-labeled per row plan.Is the 40 mm T-slot on the SBP-RAIL-4200 compatible with K2 SingleRail and Schletter SOLO 50 clamps?
Yes for clamps that target a 40 mm T-slot (K2 SingleRail uses a 40 mm slot, Schletter Eco05 and SOLO 50 mid clamps are 40 mm compatible). Schletter SOLO 50 itself is a 50 mm slot rail, so its 50 mm end caps will not fit our 40 mm extrusion — use our SBP-MC-40 and SBP-EC-40 clamps instead for a perfect match.
Request a Wholesale Quote
Fill the form and our sales engineer will reply within 24 hours with FOB price, MOQ, lead time, and certificates.
