Mid clamp or end clamp?
A mid clamp sits between two adjacent module frames. An end clamp holds the exposed frame at the end of a row. Include both types on the parts list if your installation needs them. Quantities should come from the mounting layout.
Measure the frame and rail
Record the module-frame height and the rail section. For a replacement, photograph the old clamp from above and below. Take the bolt and rail nut out for the photo if you can: the hidden connection often matters more than the top shape.
Keep the set together
Check the proposed clamp, bolt and nut against the same drawing. For samples, ask the installer to review the assembly with the intended frame and rail. Keep the approved drawing reference with the order.
Rail splices and their fixing bolts
If the order also includes rail connectors, attach the exact rail cross-section and splice drawing. Record the splice length, fixing-hole positions and the fasteners required by the mounting design. An end-view photo helps identify the profile, but dimensions and the rail-system reference are still needed. Distinguish the splice piece from a kit containing bolts, nuts or washers, and put the kit contents beside the quotation unit.
Keep a connection record with the order
Use one revision reference for the module frame, clamp, bolt, rail nut and rail section being checked. List any proposed substitute as an alternative that still needs approval. Record the sample measurements and the parts actually included in the set, then put the accepted drawing and set contents on the purchase order. Matching visible dimensions does not replace the mounting-system instructions or the project design.
Example
Measurements to include with a clamp inquiry.
| Part | Information to record |
|---|---|
| Module | Frame height and module model |
| Clamp | Body length, height and finish |
| Bolt | Thread and length |
| Rail nut | Shape, dimensions and rail-section drawing |
Related products
Related purchasing information
For installation and electrical requirements, follow the documentation for the exact component and your project design.