Agree what you want to check
Tell us whether the sample is for fit, appearance, set contents or packing. Confirm its availability, cost and shipping before arranging the review. A sample fit check does not establish electrical certification or production consistency.
Record the result
Label the sample and its drawing with the same reference. Record measured dimensions and included hardware. For a clamp or roof fitting, have the installer check it with the intended mounting system. For electrical parts, use the specified component and assembly documentation.
Put changes in the order
Write down what is approved and what needs changing. Reference the sample and drawing on the purchase order. “Same as sample” can become unclear after several revisions. Put the accepted reference and any changes on the purchase order.
Record the complete roof-fixing assembly
For a tile roof hook, record the base-plate fixing pattern, arm geometry, tile clearance specified by the design and upper rail connection. For a hanger bolt, record both thread sections, the adapter or bracket and every washer and nut supplied. Label the sample and the mating components so that the review can be repeated. Record unresolved differences instead of treating a similar appearance as approval.
Check a rail splice against the actual rail
Keep a short section or a dimensioned drawing of the intended rail with the splice review. Record the connector profile and length, fixing-hole positions and included fasteners. If an alternative is proposed, keep its record separate from the original specification until it has been approved. The sample review documents the requested part and fit; it does not establish structural capacity or replace required system documentation.
Related products
Related purchasing information
For installation and electrical requirements, follow the documentation for the exact component and your project design.