Start with the roof, not the system rating
A quotation for a 20 kW solar system does not tell a hardware supplier which roof fixing to supply. For a shop, office or small warehouse in Kenya, send the site location, a roof overview and close-up photos of the sheet or tile profile. Include the roof material, slope and supporting structure shown in the project drawings. Your installer or project engineer should establish the mounting layout and attachment requirements before quantities are finalised. This guide is a purchasing checklist, not a structural design or a statement of Kenyan installation approval.
Specify the roof attachment as an assembly
For profiled metal roofing, identify the approved fixing arrangement and supporting member; an L foot alone does not define the roof connection. For standing seams, provide the seam dimensions and profile so the specified clamp can be checked. For tile roofs, use the roof-hook arrangement in the approved design. Put the fixing, fastener, washers and any specified sealing components on the same order reference. Ask which parts are included in each set. A similar-looking fitting is not evidence of a suitable replacement.
Match module clamps to the frame and rail
List mid clamps and end clamps separately. Include the module model, frame height, clamp drawing and rail section. The bolt thread and length, rail-nut shape, material and finish belong on the same specification. Use the approved array layout for quantities and keep spare parts on a separate line. Do not estimate every fixing from the module count alone: attachment positions and rail spans depend on the design.
Include rail joints, bonding and cable support
Record rail lengths, joint locations and the matching splice part from the mounting design. List specified bonding and earthing parts separately; do not assume any metal-to-metal joint provides the required electrical connection. For cable clips, send the cable outside diameter, number of cables and thickness of the edge where the clip attaches. If PV cable or connectors are included, identify their exact specification and mating series. These details allow the installer to review the proposed parts against the project documentation.
Give suppliers the same material and delivery scope
State the required alloy or steel grade and finish from your approved specification. Tell the supplier whether the site is coastal or exposed to a corrosive environment, and have the project designer confirm suitable materials. For delivery to Kenya, name the receiving city or port and the requested delivery terms. Separate goods, packing and freight in the quotation. If your forwarder will collect in China, provide the receiving warehouse details; do not compare that price directly with a delivered quotation.
Pack for the installation team
Use one item code across the drawing, quotation, bag label and packing list. If the order covers several rooftops, ask for the available options and cost of packing by site. Mark whether clamp sets should be assembled or supplied loose, and confirm the quantity per bag. A sample should be checked with the intended frame and rail before the purchase order references the approved drawing revision. Sample fit does not replace the project design or required product documentation.
Send your list to BOLTPV
BOLTPV is a China-based sourcing and trading business supplying solar mounting and electrical accessories. Send Zihao your parts list, quantities, drawings or photos, and destination through the inquiry page. We can check the requested specifications, supply availability, sample costs and packing options before quoting. If you already buy rails locally, identify that rail section and tell us which smaller parts you need. Any alternative part should be approved by your installer before ordering.
Example
RFQ template: enter quantities from your approved design; these rows are not a complete installation bill of materials.
| Item | Specification to send | Quotation unit |
|---|---|---|
| Roof attachment | Roof profile, fixing drawing, fastener and sealing parts | Complete sets |
| Mid / end clamps | Frame height, rail section, bolt and nut reference | Sets, listed separately |
| Rail joints | Rail section and approved splice reference | Sets |
| Bonding / earthing | Specified part, connection details and quantity | Pieces or sets |
| Cable clips | Cable diameter, cable count and fixing-edge thickness | Pieces |
| Packing / delivery | Site labels, bag quantities, destination and terms | Separate charges |
Related products
For installation and electrical requirements, follow the documentation for the exact component and your project design.
K2 mounting component reference (system-specific; not approval of substitute parts)