Solar parts from China
admin@boltpv.comWhatsApp +86 156 3093 3906

PV ELECTRICAL

PV Connector RFQ Checklist: Mating Parts, Cable & Leads

Prepare a PV connector quotation request with exact mating part numbers, cable dimensions, included components and a labelled connection drawing.

Read the connector markings

Send the manufacturer, series and part number from the existing connector or datasheet. If the markings are difficult to read, photograph both halves and any original packaging. The phrase “MC4 type” alone does not identify an approved mating combination.

Include both cable measurements

The conductor cross-section and cable outside diameter describe different things. Send both from the cable datasheet. Add the project voltage and current requirements so the proposed model can be checked against them.

List the contents of the pair

Ask whether housings, contacts and seals are included. For pre-assembled leads, add the cable length and connection layout. Your installer should confirm the mating pair and crimp tool against the connector manufacturer’s instructions.

Why MC4 wording is not a complete part number

MC4 is a Stäubli connector name. A supplier description such as MC4 type or compatible does not establish an approved mixed-brand connection. Record the actual manufacturer and series of each mating half and obtain the relevant manufacturer's documentation. The cross-mating reference below explains why connector identity must be checked. It is technical background, not a claim that BOLTPV supplies that manufacturer's products.

Write an end-to-end schedule for finished leads

Give each lead or branch assembly an item reference. Label every end with its connector manufacturer and part number, then show the cable model, finished lengths and the points between which they are measured. State the quantity of complete assemblies separately from loose connector pairs and spares. For a branch, use the project-approved connection diagram; a Y-shaped photo is not enough to define the required arrangement.

Keep cable dimensions separate from cable selection

Copy the conductor cross-section and outside diameter from the exact cable model's datasheet. They describe different dimensions. Keep the cable size selected in the project specification, and ask for model-specific documentation with the quote. This checklist records purchasing information; it does not calculate cable size, circuit ratings or a permissible installation arrangement.

Compare quotations against the same parts list

Check the quoted connector part numbers, included housings, contacts and seals, cable model, length and quantity unit against your inquiry. Flag alternatives for review instead of mixing them into the accepted parts list. Attach your labelled drawings or photos separately when sending the completed RFQ template. Keep the document revision and unresolved questions with the quotation.

Related products

Related purchasing information

Product documentation

For installation and electrical requirements, follow the documentation for the exact component and your project design.

Stäubli photovoltaic connection information

Need a price?

Send your parts list and destination to Zihao.

Get a Quote